Machining a part in soft jaws
Practice the basics of CNC set up, how to load a program into an NC controller, located the WCS on the machine, run a program and inspect a machined part.
Module overview
Practice the basics of CNC set up, how to load a program into an NC controller, located the WCS on the machine, run a program and inspect a machined part. This process is the foundation of the setup and operation of nearly all programs.
After completing this module, you’ll be able to:
- Load and locate stock.
- Load and setup tool and work offsets.
- Verify feeds and speeds.
- Run a CNC program.
- Inspect a machined part.