Creating a digital CAM setup
Learn the basics of CAM Setup creation and defining stock and a work coordinate system.
‌
Module overview
Learn the basics of CAM Setup creation and defining stock and a work coordinate system. This module will also review a completed program and create the required documentation such as a setup sheet and NC Program. This information is then taken to the machine where it can be used to set up and control the machine motion to create a real part from a digital model.
After completing this module, you’ll be able to:
- Indicate a vise.
- Create a CAM setup.
- Define Stock and WCS location.
- Review a CAM program.
- Create a Setup Sheet and NC Program.
- Post Process a CAM setup .