Creating a CAM setup for a second operation
Practice creating a CAM setup and documentation for the second operation needed to machine a part.
‌
Module overview
Practice creating a CAM setup and documentation for the second operation needed to machine a part. This part requires the use of soft jaws during machining and will require the selection of fixturing in CAM to ensure appropriate collision detection. Once setup, you'll review a completed program and produce documentation and an NC program to be run at the machine.
After completing this module, you’ll be able to:
- Create a new CAM setup.
- Review a CAM program.
- Create a Setup Sheet.
- Post Process a CAM setup.