Identify and resolve clash and constructability issues between Revit and Navisworks | Autodesk

Learning

Certification

Certification overview

Architecture, Engineering & Construction

Design & Manufacturing

Media & Entertainment

Support & Policies

Learning

Course overview

Aggregate Revit models (from multi-disciplines) in Navisworks
Run a clash detection and visualize the results in Navisworks
Report a problem (model conflict) through an Issue in Navisworks
Review the Issue in Revit, fix the problem in the 3D model in Revit, and close the Issue in Revit

Related learning

Course4 hr. 30 min.

Introduction to BIM for construction management

Revit, Construction Cloud, Navisworks Products

Module30 min.

Coordinate designs across disciplines by setting the shared coordinates

Revit, Civil 3D

Module15 min.

Adding cable tray in Revit

Revit

Module20 min.

Defining loads and combinations

Revit

Course35 min.

Create the analytical model in Revit for structural analysis

Revit

Module35 min.

Track and resolve clash issues using Model Coordination on ACC and Revit

BIM Collaborate, Revit

Module10 min.

Set up model coordination in Navisworks

Navisworks Freedom, Navisworks Simulate, Navisworks Manage

Module35 min.

Create 2D sheets with construction details in Revit

Revit

Module40 min.

Coaching: How to manage Revit families

Revit

Course1 hr. 10 min.

Layout workspaces to accommodate health standards

Dynamo, Revit, Autodesk Platform Services